Antique single metal bed frame were often made of brass or cast iron, making them sturdy and able to last for years. Most of the metal frame bed consisted of a headboard, a footboard and a pair of bed rails that fit on the headboard and footboard. Enter metal slats or springs the center of the bed rails to supply pad support, though they’re not perpetually necessary if you’re employing a bed spring that is placed between the rails fitted rails. As long as you have all the required parts, the assembly of an old metal bed is simple.
Tilt the top of the bed against a enclose the world of the area wherever you would like to stay the bed. Hold the head of the bed so it is standing upright, and slide one of the bed rails into the slot near the bottom of the left leg or to the right of the headboard. Push the rail into the head of the bed as much as possible. Use a hammer to faucet the rail to create positive it’s tight. The lane should not move if it is the proper setting. Repeat this process with the other rail of the bed.
Hold the foot of the bed in an upright position and slide the other side of each of the bed rails into the slots in the lower legs of the footboard. Push the footboard on the rails as far as you can. If the bed has metal slats between the rails, the construction has completed the bed. Place the spring frame on the bed rails if there are no metal slats. Place the mattress on top of the springs.